Cara Menginstal Windows 98

Add caption

Microsoft's Windows 98 SE - CD Install on Blank Hard Drive

What you will require to do this walkthrough is

1.      A Windows 98 CD

2.      A Computer with CD-ROM access

To start this Windows install. First check that the first boot device in your system BIOS is set to the  CD-ROM Drive.( To find out how to access the BIOS please refer to your motherboard manual or the manufacturer of your computer. (The system bios can usually be entered on boot, usually by pressing the F1, F2, F8, F10 or DEL key. Make sure you save the settings before exiting))
If you are unsure or don't want to enter the BIOS then just test the computer by putting the CD-ROM in the drive and rebooting the computer. This is the recommended way to install windows.
You will know that your computer will/has booted of CD-ROM when the following screen appears.
To begin the Windows 98 install select Option 2 (Boot from CD-Rom)

The following screen will appear next. Select Option 1. (Start Windows 98 Setup from CD-ROM)

Your CD-ROM driver will now install, be patient this may take a few moments.

Now press Enter to continue, or F3 to exit.

Setup will now perform checks on your system, press Enter to continue.

Next Scandisk will run, let this complete or setup.

Now setup will copy important files for the install.

 

PART 2

Setup has now begun, the mouse should now be active, press Continue to proceed. If you have a change of mind then press Exit Setup. If the mouse is not active press "ENTER" on the keyboard.

The wizard will now start. Be patient this may take a few moments.

Now select the directory you wish to install Windows into. By default C:\Windows will be selected. You can change this, but it is not advised. Click on Next to Continue.

Setup will now prepare the directory, be patient this may take a moment.

Setup now checks disk space. 

What do you wish to install. We recommend Typical, which is the default. So click Next to continue.

Windows Components to be installed will now be listed. Leave at default and press Next.

If a Network card has been detected the following will appear. Fill in the details and click Next.

Now your country settings, select as needed and then press Next.

Windows will now copy files, this will take sometime. Be patient

PART 3

After sometime you will be prompted to restart, Windows will do it itself, you can click on Restart Now to quicken the process.

The CD-ROM boot menu will appear. Select option 1 (Boot from Hard Disk)

Booting for first time screen will appear.

Now enter your name, company is optional. Click on Next to continue.

Now the License Agreement. Read and if you agree click on "I accept the Agreement" and click next. If you select ""I don't accept the Agreement" then setup will end. 

Now input your product key or certificate authenticity code. This is 16 digits and is located on the back of your CD case or on the Windows 98 Book. If you have an OEM computer then it could be on the side or back of your computer. Click next to continue. 

Next click on Finish.

Related Post by ~ Heric-Ajha ~ :

Cara Menginstal Windows 98

Backlinks Please Thanks ^_^

URL

Code For Forum

HTML Code <a href='http://heric76.blogspot.com/2012/05/cara-menginstal-windows-98-microsofts.html' target='_blank'>Cara Menginstal Windows 98</a>